| An online B2B marketplace, conecting buyers & suppliers of plastic, plastic products, enquipment and plastic supplies & raw material, from all across the globe. |
|
 |
Plastic Industry | |
Exporters Directory | |
Trade Leads | |
Tenders | |
Trade Events | |
Plastic News | |
Associations |  |
|
|
|
 |
|
Plastic Marketplace »
Plastic Datasheet » Acetal |
 
|
|
|
|
| Specific Gravity | 1.41 |
| Shrinkage,in/in,1/8 in. thick | 0.0200 |
| Shrinkage,in/in,1/4 in.thick | 0.0300 |
| Water Absorption,% 24hrs | 0.220 |
| MECHANICAL | |
| Impact,Izod,Notched (Ft-Lb/In) | 1.00 |
| Impact,Izod,Unnotched(Ft-Lb/In) | 20.00 |
| Tensile Strength (Psi) | 8,800 |
| Tensile Elongation (%) | 60.000 |
| Tensile Modulus (Psi x E+6) | 0.41 |
| Flexual Strength (Psi) | 13,000 |
| Flexural Modulus (Psi x E+6) | 0.38 |
| Compressive Strength (Psi) | 4,500 |
| Hardness (Rockwell R) | 107.0 |
| ELECTRICAL | |
| Dielectric Strength (V/Mil) | 500 |
| Dielectric Constant(@ 1 MC dry) | 3.70 |
| Dissipation Factor(@ 1 MC dry) | 0.006 |
| Arc Resistance (sec) | 200 |
| Volume Resistivity(ohm-cm)10E## | 14.0 |
| THERMAL | |
| Heat Deflection Temp 264 psi(F) | 230 |
| Heat Deflection Temp 66 psi(F) | 316 |
| Flammability | HB |
| Thermal Expansion (In/In/F)xE-5 | 4.700 |
| Thermal Conductivity | 1.7 |
| WEAR | |
| Wear Factor | NA |
| U L yellow card | NO |
| Plastic Datasheet | ||
| ABS
Acrylonitrile Butadiene Styrene CP Cellulose Acetate Propionate CPVC Chlorinated Polyvinyl Chloride EVA Ethylene Vinyl Acetate HDPE High Density Polyethylene HIPS High Impact Polystyrene HMWHDPE High Molecular Weight HDPE In Ionomers (Surlyn) LCP Liquid Crystal Polymer LDPE Low Density Polyethylene LLDPE Low Linear Density Polyethylene MBS Polymethacrylate Butadiene Styrene PA11 Polyamide (Nylon) 11 PA12G Polyamide 12, 30% glass filled PA6 Polyamide (Nylon) 6 PA66 Polyamide (Nylon) 66 PA66M Polyamide 66, 40% mineral filled |
PAEK
Polyaryletherketone PAS Polyarylsulfone PB Polybutylene PBT Polybutylene Terephtalate PC Polycarbonate PC/ABS Polycarbonate/ABS Alloy PEEK Polyetheretherketone PEI Polyetherimide PEKEKK Polyetherketoneetherketoneketone PES Polyethersulfone PET Polyethylene Terephtalate PETG Polyethylene Terephtalate Glycol PMMA Polymethylmethacrylate (Acrylic) POM Acetal PP olypropylene Homopolymer PPA Polyphtalamide PP/Co Polypropylene Copolymer |
PPE
Phenylene Ether Copolymer PP/Glass f Polypropylene 30% Glass Filled PPS Polyphenylene Sulfide PP/Talc Polypropylene 40% Talc Filled PSO Polysulfone PUR olyurethane Plastic Rigid PVDC Polyvinylidene Chloride PVDF Polyvinyldene Fluoride RPVC Rigid Polyvinyl Chloride SAN Styrene Acrylonitrile Copolymer TP Thermoplastic Elastomer Polyester TPI Polyimide TPO Thermoplastic Elastomer Polyolefin TPU Thermoplastic Polyurethane XPS PolystyreneCrystal |
| Plastic Industry | Exporters Directory | Trade Leads | Tenders | Trade Events | Plastic News | Associations | Plastic Resources |
| Finished Plastic Products | Plastic Processing Equipment | Plastic Supplies & Raw Materials | Resins & Compounds | Plastic Scrap | Thermoplastic Materials | Thermoset Materials |
  |
 |
|
 |
||||||||||||||||||
|
|
|
|
||||||||||||||||||
|
About Us | Press
Room | Awards
| Commendations
| Success
Stories | Contact
Us | Terms
of Use | Privacy
Policy | Feedback
| Help |
| Copyright © 1996-2008 IndiaMART InterMESH Limited |
